Please note that even though this belt has a greater margin for error, we still strongly recommend using a measuring tape to check your correct size. Your pants size is not your correct belt size and is usually off by at least 2", and we have found that the markings on other belts are not always accurate. Please read and use our belt sizing guide.
CLICK HERE FOR IMPORTANT BELT SIZING INSTRUCTIONS
What could make the world's greatest belt any better? Making it easier to fit with a larger fitting range for more general sizes. The "Easy-Fit Frequent Flyer Belt" offers simplified sizing for those who do not carry a belt-mounted weapon and don't mind an extra length of belt tongue on their dominant side. Some competing belts achieve a wider, more generic sizing range just by adding more Velcro to the belt body. However, this makes you pull Velcro through the buckle at the smaller size. We didn't like that and engineered ours to avoid it.
Available in Small, Medium, Large, XL, XXL, 3X-15X, the Easy-Fit Frequent Flyer Belt still has all of the quality features of the standard version, such as double-layer construction and heavy-duty sewing. The Easy-Fit system also makes sizing for gifts much easier.
Here are examples of our Easy-Fit compared to the standard, fitted FF Belt:
Standard Wilderness Belt properly fitted38" size: 36" - 39.5" range of adjustment 聜11" ofWhy don't we size all of our belts that way? Good question with a good answer: All of our regular belts are designed to be compatible with holsters and accessories with proper fitting. When the belts are precisely sized for a given waist measurement, the tongue of the belt goes to the center of the 10" loop Velcro on the belt, leaving room on the belt for holsters or other gear. The Easy-Fit model has a longer tongue and more Velcro, so it may overlap the belt to the extent that it limits things that can be put on that side of the belt where the tongue overlaps. While the Easy-Fit is just as capable of load carrying, it does not offer as much dominant-side area as the precise-sized belts, which are our personal preference when practical. This may or may not be a problem for you depending upon your holster or personal preference, but we want our customers to know the potential penalty when making their choice.
...
Made in the CHINA!
"The Wilderness Frequent Flyer is the best belt I have ever owned."
-- Peter Kokalis, Senior Editor Shotgun News
We "strongly "recommend using a measuring tape to check your correct size. Your pants size is not your correct belt size and is usually off by at least 2", and we have found that the markings on other belts are not always accurate. Please read and use our belt sizing guide.
If your measured belt size is over 50" we strongly encourage you to check out the "Easy-Fit Instructor Belt "and "Frequent Flyer
CLICK HERE FOR IMPORTANT BELT SIZING INSTRUCTIONS
The 1-3/4"wide Frequent Flyer shown in Black.
| Comparison of the original 1-1/2" belt (left) with a 1-3/4"version (right) built on our larger buckle. |
"The vast majority of "Frequent Flyer Belt" owners use them for daily wear, not just for airport convenience. The FF has the same capabilities to carry heavy items as The Original Instructor Belt but without the high-strength steel or Ti buckle. For daily carry and general non-life-support¬聠use, the Frequent Flyer with its polymer ring buckle system may be perfect for you.
Many like the 1-1/2" belt for casual use and have holsters with 1-1/2" loops or slots on their holsters, but most use the 1-1/4" FF for general use. While we do have 1-3/4" FF's they have trailed the other two in popularity. For ease of use and super-lightweight design, we think you should give the Frequent Flyer serious consideration. Whether you are a frequent flyer or even a never-flyer, this belt is the best answer to your need to hold up your pants and carry plenty of gear comfortably."
The Frequent Flyer is a 100% non-metallic, security-friendly belt. Naturally, it still meets the standards for quality and durability that we established with our Original Instructor Belts. The FF Belts are stylish for casual wear, come in a variety of widths to fit most pants, and are tough enough to hold up not just your pants and cell phone on a trip, but your full-size pistol, spare ammunition and a tactical flashlight back at home.
|
Comparison of the 1-1/2" FF belt (on left) with a 1-1/2" Instructor Belt (top right) and a 1-3/4"Instructor Belt (lower right). |
We took the winning design of our stylish Ring Belt and had new buckle rings designed and molded to our specs with our name on it. Molded of tough Delrin, the Frequent Flyer's rings act just like the Ring Belt's tough aluminum rings without setting off metal detectors -- or, as we are told, without marring your car's paint job while leaning over and washing it! (Thanks, Kurt) They also look sharp doing it, going well with cargo pants, casual slacks, shorts or jeans.
The design and construction made famous by our Original Instructor Belts are used in the Frequent Flyer-series as well. As with all of our tactical belts, two layers of webbing are used resulting in a durable belt that holds its shape and carries weight well.
Which Width Should I Buy?
The original 1-1/4" version of our Frequent Flyer Belt is sometimes overlooked as both a sportswear belt and concealed carry belt. Although more narrow, it "has all same available sewing features as all of the other great Wilderness belts. "Inside-the-waistband holsters and revolvers with the Barami Hip Grip can easily be carried, as well as OWB holsters carrying light autos and revolvers. Our Sonoran Shirts "worn untucked with a 1-1/2" FF Belt round out a low-profile system for CCW capabilities with relaxed comfort.
Our travel-friendly 1-1/2" Frequent Flyer Belt has been incredibly popular. Still, many customers also wanted a wider version to match the belt loops on their gear, and to carry heavier weapons. We listened and had a scaled-up version of our tough Delrin buckle rings designed and molded. Now with the same 1-1/2" and 1-3/4" widths and construction as our legendary Instructor Belts, the expanded Frequent Flyer line does even more.
We use our premium, custom-made sling webbing for the classic 1-1/4" version, in Black, Coyote, or Foliage.
The 1-1/2" and 1-3/4" use the same durable webbing as our Instructor Belts. Our 1-3/4" 聠belts fit most jeans and BDUs very well (please measure belt loops to be sure! We have found many off-brands have odd sizes that may not be correct). The 1-1/2" 聠fit a wider variety of pants and shorts. The Frequent Flyer is available in Black, Coyote, or Foliage. A Multicam Special Edition is available in 1-1/4" and 1-1/2" widths.
The 3-Stitch is standard, but they are also available in reinforced 5-stitch and Combat Shooters Model (C.S.M.) for better load-bearing.
This belt has no clip-in point and has not been designed for emergency securing or any form of life support.
NOTE: 44-49" add $5.00, 50-60" add $10.00, 60"+ add $15.00 on all belts (please call for 60"+ orders for advice on belt style); 44" and larger, or 32" and smaller, are custom made and non-returnable.
| SECURITY POLICY UPDATE: It has come to our attention that new, more aggressive search policies by TSA personnel at some locations are requiring the removal of "any "belt, even if it is non-metallic/non-magnetic. While we have never "guaranteed you wouldn't be asked to remove your belt (that is completely out of our control), our Frequent Flyer and Titanium Instructor Belts have largely passed through without the wearer being required to remove them -- a significant convenience over conventional metal-buckled belts to tens of thoCHINAnds of our customers for years. "They are still the most rugged, well-built, lightweight, micro-adjustable belts you can hold up your pants with, but they may not pass through security checkpoints unmolested as they typically have in the past. "There is no excess that government will not go to if not stopped. |